Tag Archives: machine shop

Machine Mechanic

AVANT is recruiting for several full-time openings with a manufacturer in Oxford, NC. Excellent pay and benefits available! Positions open on all 3 shifts.

Basic Function:
Assembles, operates, adjusts, troubleshoots, services and maintains all filling and assembly equipment in the company facilities with little or no direction from immediate Manager, Supervisor, or Group Leader.

Major Duties:
· Assists in coaching and training of mechanics and process facilitators.
· Plans, initiates and completes job assignments in a prompt and timely manner.
· Ability to operate all shop equipment except the CNC.
· Trained and certified to make adjustments/repairs in electrical panels as defined in electrical Safe Practices for Mechanics.
· Has a working knowledge of major processes in multiple cost centers.
· Communicates immediately to manager, supervisor or group leader any personnel or job coordination problems, parts or tool shortages. Reports all accidents, safety hazards, company policy violations and any other information that in their judgement requires attention.
· Initiate line/equipment tooling requirements in support of new products.
· Participates in project management including line layout derivation/review, installation and start-up.
· Must be able to interface effectively with outside vendors to place supply or part orders.
· Has an advanced understanding of pneumatic and hydraulic systems in the plant.
· Install, checks, adjusts, all troubleshooting and machinery repairs, conveyors and miscellaneous equipment as required for plant operations as directed by supervisor or designee.
· Must be able to develop skills to meet required change over standards as determined by OEE studies.
· Responsible for the complete set-up of all filling and assembly equipment.
· Must be able to run filling equipment in a safe, efficient manner and assist in quality production per the RPPS.
· Responsible for MU (material usage) to keep scrap levels at or below allowable standards.
· Ability to change and adjust process equipment; filling heads, capper torque check weigher, labelers, pumps and additional ancillary equipment.
· Load components into hoppers or bins during initial start up and assist line service if required to keep filling lines running.
· Cleaning and sanitization of tooling and equipment per SPI and maintain logbook.
· Must be able to respond to job assignments plantwide.
· Inspects and makes repairs as needed to maintain preventive maintenance programs.
· Maintains required records such as major maintenance, PM, IQOQPQ.
· Makes suggestions to management on better, more efficient and less costly methods to complete jobs.
· Monitors and operates equipment in accordance with established procedure.
· Keeps assigned work areas safe, clean and orderly.
· Completes job assignments by supervisor or designee in a prompt and timely manner.
· Complies with company policy regarding GMP, good housekeeping, and all safety regulations.
· Performs other related duties as may be assigned but not limited to the above.
Knowledge and Skills Requirements:
· Ability to read and work from detailed blueprints and schematics as required.
· Good working knowledge of plant equipment and systems.
· Must be able to learn basic applicable computer skills
· Must achieve a minimum score of 46.64 on the Standard Timing Model Test.
· Ability to train other Tech Levels as well as other Tech Level A employees.
· Ability to operate power shop tools in addition to common hand tools safely and effectively.
· Must be able to provide hand tools as required.
· Must be able to routinely lift and carry up to 50 pounds and manipulate bulk drums weighing up to 400 pounds.
· Able to push and pull objects weighing up to 50 lbs.
· Able to stand and/or walk 90% (sitting 10%) of an 8-hr day which includes climbing a ladder or steps.
· Must meet the vision and hearing requirements.

Minimum Education: High School Graduate or GED
Minimum Experience: 3 -5 years experience or equivalent

Apply on-line to be considered, or for more information about this position.

Machine Technician

We have an immediate opening with a local automotive parts manufacturer that is looking for  machine technicians for full-time positions to setup, maintain and troubleshoot production line machinery. Full time, long term, temporary- to- hire.

You will be responsible for keeping CNC machines operating within specifications, changing out tools, handling alarm resets, keying in machine codes and directions, and using precise measuring equipment such as calipers, micrometers and bore gauges, working in this fast paced position. Documenting production times and quality.

Multiple shifts available working for this great local company. Training is provided, but a minimum of 3 years prior machine shop or mechanical experience required.

Positions start at $13.00 per hour (dependent on experience), with overtime available.

Apply on-line today!

Press Brake Retooler – Efland, NC

Summary:

Solid local company immediately hiring Press Brake Operators for 2nd shift. Training will be on first shift.  Pay based on experience and starts at $17

Skills required:

Proficient at retooling machine

Expert at creating no less than four bends

Expertly able to read blueprint to punch/program CNC codes

Expertly use calipers and micrometers to perform regular quality checks

Qualifications required:

3+ years experience with Press brake or equivalent

Receive no less than 90% on in house math test

Able to train on 1st shift

High School Diploma or GED required

Click HERE to apply on-line!

 

Press Brake Operator – Multiple Openings!

Summary:

Solid local company immediately hiring Press Brake Operators for all shifts. Training will be on first shift.  Pay based on experience.

Skills required:

Proficient at retooling machine

Expert at creating no less than four bends

Expertly able to read blueprint to punch/program CNC codes

Expertly use calipers and micrometers to perform regular quality checks

Qualifications required:

3+ years experience with Press brake

Receive no less than 90% on in house math test

Able to train on 1st shift

High School Diploma or GED required

 

Click HERE to apply on-line!

 

Machine Technician

We have an immediate opening with a local automotive parts manufacturer that is looking for technicians for full-time positions to setup, maintain and troubleshoot production line machinery.

You will be responsible for keeping machines operating within specifications, changing out tools, handling alarm resets, keying in machine codes and directions, and using precise measuring equipment such as calipers, micrometers and bore gauges, working in this fast paced position.

Multiple shifts available working for this great local company. Training is provided, but prior machine shop or mechanical experience required.

Positions start at $13.00 per hour, with overtime available.

Apply on-line today!

CNC Machinist – Filled

AVANT is recruiting for a CNC Machinist for a full-time position with a shop in Apex, NC.  This is a first shift position, working 8a-5p, Monday through Friday, with occasional overtime.

The right candidate will have experience with tooling, mills, lathes, and programming. Previous experience with AutoCad, Mastercam, or Gibbscam software is a must. If you have excellent math and computer skills, and at least 3 years of experience, apply now!

Excellent pay available for this position based on your experience level.

Click here to apply on-line!

Machine Technician/Operator – Filled

We have an immediate opening with a local automotive parts manufacturer that is looking for technicians for full-time positions to setup, maintain and troubleshoot production line machinery.

You will be responsible for keeping machines operating within specifications, changing out tools, handling alarm resets, keying in machine codes and directions, and using precise measuring equipment such as calipers, micrometers and bore gauges, working in this fast paced position.

Multiple shifts available working for this great local company. Training is provided, but prior machine shop or mechanical experience required.

Positions start at $13.00 per hour, with overtime available.

Apply on-line today!

2nd Shift Press Brake Operator – Filled

Summary:

Solid local company immediately hiring a 2nd shift Press brake operator. Training will be on first shift.

Skills required:

Proficient at retooling machine

Expert at creating no less than four bends

Expertly able to read blueprint to punch/program CNC codes

Expertly use calipers and micrometers to perform regular quality checks

Qualifications required:

3+ years experience with Press brake

Receive no less than 90% on in house math test

Able to train on 1st shift

High School Diploma or GED required

 

Click HERE to submit resume

 

Machine Technician (Oxford) – Filled

We have an immediate opening with a local automotive parts manufacturer that is looking for technicians for full-time positions to setup, maintain and troubleshoot production line machinery.

You will be responsible for keeping machines operating within specifications, changing out tools, handling alarm resets, keying in machine codes and directions, and using precise measuring equipment such as calipers, micrometers and bore gauges, working in this fast paced position.

Multiple shifts available working for this great local company. Training is provided, but prior machine shop or mechanical experience required.  Positions start at $13.00 per hour with overtime available.  Apply on-line today!

Machine Technician (Oxford) – Filled

We have an immediate opening with a local automotive parts manufacturer that is looking for technicians for full-time positions to setup, maintain and troubleshoot production line machinery.

You will be responsible for keeping machines operating within specifications, changing out tools, handling alarm resets, keying in machine codes and directions, and using precise measuring equipment such as calipers, micrometers and bore gauges, working in this fast paced position.

Multiple shifts available working for this great local company. Training is provided, but prior machine shop or mechanical experience required.  Positions start at $13.00 per hour with overtime available.  Apply on-line today!

Welder

A sheet metal fabricating company is looking for an expert MIG, Stick, and TIG welder for immediate hire. Individual must be a confident self starter who enjoys working independently, and takes prides his/her work. Strong math skills and attention to details are qualities this employer find vital to this position.

Skills required include, but are not limited to, the following;

*Expertly complete sanitation welds
*Read tape and calipers
*Perform final product inspections and maintain tolerances
*Have valid drivers license
*3 references required
*Skill testing will be required prior to job offer
*Sheet metal experience a plus

Click here to apply on-line!

Press Brake Operator

An RTP metal fabrication company, specializing in precision machined parts, is looking for a confident qualified brake press operator for a temp-to-hire position.

Candidate qualifications include but are not limited to:
*Experience setting up/tooling an Amada press brake
*Minimum two years operating a press brake
*Ability to independently create multiple precise bends on variety of metal widths
*Perform final quality inspection on each part
*Expertly able to read blue prints
*Expertly able touse precise measuring equipment
*High school diploma, Associates Degree or higher preferred

Skill testing will be required as part of the application process for candidates.

Click here to apply on-line!